Digitize Logo for Embroidery: Tips & Tricks | iMaker Digitization

The process of branding your company, products, and services by stitching logos on apparel, head gear, bags, or any other material is an effective method of advertising. Nevertheless, it is important to identify that digitized logos for embroidery require skills and adequate knowledge to produce a perfect image. From choosing of thread colors to stitch types the basic things that one has to keep in mind while converting a logo from a design phase – let’s dive into the tips and tricks!

Simplify the Logo Design

It is advisable to keep things a little simpler to digitize the logo for embroidery. If a logo is complicated and has small intricate lines, then it would not look nice when embroidered. 

  • First of all, if this is necessary, we should streamline the art within a logo or make it less detailed. 
  • Eliminate finer aspects that fail to be conspicuous at the embroidery scale. 
  • Minimize diagonals and color transitions down to definite solid colors. 
  • Avoid moving from one color to another because lines of demarcation tend to stand out and appear raised. 
  • Pay attention to shapes and outlines when analyzing the logo as well. 

Choosing File Format

When your logo art is ready, try to save it in a suitable format for your embroidery digitizing logo. The best among them is vector art instead of raster images in the form of JPGs or PNGs. Depending on the resolution, bitmap formats such as BMP, JPG or PNG are good for digitizing, but vector formats like AI, EPS or SVG offer the outlines and shapes. The lines and curves depicted will capture the shape cleanly and will digitize to embroidery perfectly. 

Determine Appropriate Size

Think about the usage of the logo and decide how big it should be embroidered on any material or item before you digitize logo for embroidery. A shirt might have a small logo of 2-3.5 inches in addition to the hat or bag or towel featuring a large logo. To ensure that the logo is digitized in the right size, give your digitizer the intended size of the logo or you could seek their advice on the best size to use. It is advisable not to digitize logos that have a size smaller than half an inch or so in height. Another practical drawback that needs to be taken into consideration is the fact that logos that stitch out too small also hinder clear visibility.

Select Thread Colors

Selecting the right shades of thread gives the logo its life and color when stitching after embroidery digitizing. Your digitizer is able to do a fairly good job in finding color equivalence for vector art files. If bitmap logos or when you need specific thread materials, specify the required thread colors here. Supplement thread brand, color numbers, and names to give a clear description of the shades available. Picking around 8 or fewer colors is easier to manage and less likely to clash against each other. 

If finance is an issue, there might be problems with the availability of the material or the choice of metallic or specialty threads could restrict the range of colors. It is preferable to select 4-5 colors of consistent quality that are harmoniously combined in a thread palette to embroider logos.

Consider Underlay Stitches

Underlays are particularly beneficial for logos that have filled areas, and where large lettering is employed. These stitches are created before and are hidden by top stitches which are more apparent. Selecting the right type of underlay that allows filled areas to maintain their form in completed embroidery is important. A good digitizer understands when it is appropriate to employ specific fill patterns, for instance, going in every direction for optimum stability. Underlays also lift logged surfaces to the same height so edges seam neat, rather than blending seamlessly into the underlay.

Stitch Angle and Direction 

The stitch angle and direction should be set in a way that contributes to the efficiency of the base material utilized in the clothing wear sector. Mastering the aspect of stitching is not a mere science but a blend of art for the digitizers when it comes to angling. Stitch direction should run smoothly along edges and increasing curvature looks very nice – these outlines are logos. In filled zones, stitch flow avoids too large jumps noticeable in the viewers’ eyes. These differences make the sought combination possible and/or can depict directionality or shape contours as a result of subtle grading of stitch angles.

Focus on Fine Details

The fine details that go into creating a clean logo embroidery often say it all. It applies to any elements with narrow stock thickness, complex intersections of geometrical shapes, rounded corners or any other intricate details. Sometimes, it refers to changing from one stitch type to another with a lot of precaution to grab every detail. The actual contour of the logo deserves a very special consideration as distinct ‘boundaries’ of what is visible. 

Get a Digitized Sample

With a sample, if the logo looks distorted, it can be easily noticed during the digitizing services for the embroidery process. Comparing size, stitch density, color match, and other finer details is much more effective than using an actual sample. 

There are numerous features that you wish to have changed and it is possible to revise any of them while having the stitches worked until all of them appear refined. You can approve the final sample so that your digitizer uses those exact settings on the full number of logo orders. Make sure you do not leave out this quality control process.


The right way to digitize logos for embroidery helps turn common logos into stand-out embroidery. Such an approach leverages talent smartly when working with a knowledgeable digitizer. If due care is exercised in all developing phases, then soon the ‘Branded Logo’ will be creating that ever-memorable ‘stitched-in’ impression! Call iMaker Digitization today and get the digitization of your logo for amazing embroidering.

0 replies

Leave a Reply

Want to join the discussion?
Feel free to contribute!

Leave a Reply

Your email address will not be published. Required fields are marked *